SMC Networks SMC TigerStack 1000 SMC8748M - Manual (Page 305)

S
YSTEM
M
ANAGEMENT
C
OMMANDS
4-33
Example
hostname
This command specifies or modifies the host name for this device. Use the
no form to restore the default host name.
Syntax
hostname name
no hostname
name - The name of this host. (Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
switch renumber
This command resets the switch unit identification numbers in the stack.
All stack members are numbered sequentially starting from the top unit for
a non-loop stack, or starting from the Master unit for a looped stack.
Syntax
switch all renumber
Default Setting
• For non-loop stacking, the top unit is unit 1.
• For loop stacking, the master unit is unit 1.
Command Mode
Global Configuration
Console(config)#prompt RD2
RD2(config)#
Console(config)#hostname RD#1
Console(config)#