SMC Networks SMC TigerStack 1000 SMC8748M - Manual (Page 163)

P
ORT
C
ONFIGURATION
3-107
Web – Click Port, Port Configuration or Trunk Configuration. Modify the
required interface settings, and click Apply.
Figure 3-50 Port - Port Configuration
CLI – Select the interface, and then enter the required settings.
Creating Trunk Groups
You can create multiple links between devices that work as one virtual,
aggregate link. A port trunk offers a dramatic increase in bandwidth for
network segments where bottlenecks exist, as well as providing a
fault-tolerant link between two devices (i.e., single switch or a stack). You
can create up to 32 trunks.
Console(config)#interface ethernet 1/13 4-174
Console(config-if)#description RD SW#13 4-174
Console(config-if)#shutdown 4-180
.
Console(config-if)#no shutdown
Console(config-if)#no negotiation
4-176
Console(config-if)#speed-duplex 100half 4-175
Console(config-if)#flowcontrol 4-178
.
Console(config-if)#negotiation
Console(config-if)#capabilities 100half
4-177
Console(config-if)#capabilities 100full
Console(config-if)#capabilities flowcontrol
Console(config-if)#exit
Console(config)#interface ethernet 1/21
Console(config-if)#media-type copper-forced
4-179
Console(config-if)#