Setting the time zone, Setting the time zone -43, Figure 3-21 sntp configuration -43 – SMC Networks SMC TigerStack 1000 SMC8748M User Manual
Page 99: Command attributes
B
ASIC
C
ONFIGURATION
3-43
Web – Select SNTP, Configuration. Modify any of the required
parameters, and click Apply.
Figure 3-21 SNTP Configuration
CLI – This example configures the switch to operate as an SNTP client
and then displays the current time and settings.
Setting the Time Zone
SNTP uses Coordinated Universal Time (or UTC, formerly Greenwich
Mean Time, or GMT) based on the time at the Earth’s prime meridian,
zero degrees longitude. To display a time corresponding to your local time,
you must indicate the number of hours and minutes your time zone is east
(before) or west (after) of UTC.
Command Attributes
•
Current Time – Displays the current time.
•
Name – Assigns a name to the time zone. (Range: 1-29 characters)
•
Hours (0-13) – The number of hours before/after UTC.
Console(config)#sntp client
Console(config)#sntp poll 16
Console(config)#sntp server 10.1.0.19 137.82.140.80 128.250.36.24-70
Console(config)#sntp client
Console(config)#exit
Console#show sntp
Current time: Jan 2 01:45:28 2001
Poll interval: 16
Current mode: unicast
SNTP status: Enabled
SNTP server 10.1.0.19 137.82.140.80 128.250.36.2
Current server: 137.82.140.80
Console#