beautypg.com

Shutdown, Shutdown -180, Shutdown (4-180) – SMC Networks SMC TigerStack 1000 SMC8748M User Manual

Page 452

background image

C

OMMAND

L

INE

I

NTERFACE

4-180

Default Setting

sfp-preferred-auto

Command Mode

Interface Configuration (Ethernet)

Example
This forces the switch to use the built-in RJ-45 port for the combination
port 21.

shutdown

This command disables an interface. To restart a disabled interface, use the
no form.

Syntax

[no] shutdown

Default Setting

All interfaces are enabled.

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

This command allows you to disable a port due to abnormal behavior
(e.g., excessive collisions), and then reenable it after the problem has
been resolved. You may also want to disable a port for security reasons.

Example
The following example disables port 5.

Console(config)#interface ethernet 1/21
Console(config-if)#combo-forced-mode copper-forced
Console(config-if)#

Console(config)#interface ethernet 1/5
Console(config-if)#shutdown
Console(config-if)#

This manual is related to the following products: