SMC Networks SMC TigerStack 1000 SMC8748M - Manual (Page 331)

S
YSTEM
M
ANAGEMENT
C
OMMANDS
4-59
Command Mode
Global Configuration
Command Usage
The message level specified for flash memory must be a higher priority
(i.e., numerically lower) than that specified for RAM.
Example
logging host
This command adds a syslog server host IP address that will receive
logging messages. Use the no form to remove a syslog server host.
Syntax
[no] logging host host_ip_address
host_ip_address - The IP address of a syslog server.
Default Setting
None
Command Mode
Global Configuration
Command Usage
• By using this command more than once you can build up a list of host
IP addresses.
• The maximum number of host IP addresses allowed is five.
Example
Console(config)#logging history ram 0
Console(config)#
Console(config)#logging host 10.1.0.3
Console(config)#