SMC Networks SMC TigerStack 1000 SMC8748M - Manual (Page 329)

S
YSTEM
M
ANAGEMENT
C
OMMANDS
4-57
logging on
This command controls logging of error messages, sending debug or error
messages to switch memory. The no form disables the logging process.
Syntax
[no] logging on
Default Setting
None
Command Mode
Global Configuration
Command Usage
The logging process controls error messages saved to switch memory.
You can use the logging history command to control the type of error
messages that are stored.
Example
Related Commands
logging history (4-58)
clear log (4-62)
logging facility Sets the facility type for remote logging of
syslog messages GC 4-60
logging trap Limits syslog messages saved to a remote
server based on severity GC 4-61
clear log Clears messages from the logging buffer PE 4-62
show logging Displays the state of logging PE 4-62
show log Displays log messages PE 4-64
Console(config)#logging on
Console(config)#
Table 4-17 Event Logging Commands (Continued)
Command Function Mode Page