IEI Integration DM_Series v1.14 - Manual (Page 50)

DM Series Industrial Monitor
Page 50
2.5.7 DM-190 Mounting Kits
Table 2-9 lists the mounting kits available for the DM-190 monitor.
Model DM-190
Panel Mounting Kit PK-190M
Rack Mounting Kit RK-190MS-R10
Wall Mounting Kit WK-190MS-R10
DIN Mounting Kit -
LCD Monitor Arm ARM-31
LCD Monitor Stand -
Table 2-9: DM-190 Mounting Kits
2.6 Mounting Options
Each DM series industrial monitor has a number of mounting holes or slots located on the
back side of the aluminum frame or on the rear panel for mounting the monitor to a rack,
panel, cabinet, DIN rail, wall, arm or stand. The following sections describe the various
mounting methods or each model of the DM series industrial monitor.
2.6.1 Panel Mounting
Each model of the DM series industrial monitor has a series of mounting slots located on
the top and bottom panel for mounting the monitor to a panel.
NOTE:
The DM-65 monitor requires two special mounting brackets for installation into
a panel. Refer to Section 5.5.1.2 for details.
Figure 2-11 shows a typical panel installation.