IEI Integration DM_Series v1.14 - Manual (Page 164)

DM Series Industrial Monitor
Page 164
7.1 Introduction
The touch panel controller enables analog resistive touch panels for four-wire, five-wire &
eight-wire models. The controller directly communicates with the PC system through the
touch panel communications interface. The controller design is superior in sensitivity,
accuracy, and friendly operation. The touch panel driver emulates the left mouse button
and the right mouse button functions.
The touch panel driver supports the following operating systems:
„ Microsoft Windows versions:
o Microsoft Windows 95
o Microsoft Windows 98
o Microsoft Windows ME
o Microsoft Windows 2000
o Microsoft Windows NT
o Microsoft Windows XP
o Microsoft Windows XP Tablet PC Edition
„ Microsoft Windows CE versions:
o Microsoft Windows CE 2.12
o Microsoft Windows CE 3.0
o Microsoft Windows CE. NET
„ Linux
„ IMac
„ DOS.
Driver installation is described below.
7.2 Driver Installation
To install the touch panel software driver, please follow the steps below.
Step 1: Insert the driver CD that came with the DM series industrial monitor into the CD
drive.
Step 2: Once the CD drive is installed, the screen in Figure 7-1 appears.