IEI Integration DM_Series v1.14 - Manual (Page 127)

DM Series Industrial Monitor
Page
127
Step 7: Make sure all the components listed in the packing list are present. Step 0:
5.2.3 Packing List
All the monitors in the DM series are shipped with the following components:
„ 1 x DM-190/170/150/121/104/84/65 series industrial monitor.
„ 1 x AC Power cable
„ 1 x VGA Cable
„ 1 x 45W AC Power Adapter (DM-190 / 170 / 150 / 121)
„ 1 x 25W AC Power Adapter (DM-104 / 84 / 65)
„ 5 x Replacement Round Head Screw
„ 5 x Replacement Flat Head Screw
„ 5 x Replacement Wire Strain Band
„ 1 x User Manual on CDROM
„ 1 x Power Cable for Terminal Block (Optional for M model)
„ 1 x Touch Panel RS-232 Cable / Touch Pen / Driver CDROM (Optional for T-R
model)
„ 1 x Touch Panel USB Cable / Touch Pen / Driver CDROM (Optional for
USB/T-R model)
If any of these items are missing or damaged, contact the distributor or sales
representative immediately.
5.3 Pre-installation Preparation
5.3.1 Tools
Before installing the DM series industrial monitor, make sure the following tools are on
hand:
„ Philips (crosshead) screwdriver : All the retention screws on the system are
Philips screws.
„ Soft working mat : When the DM series industrial monitor is installed, the
screen is placed on the working surface. It is therefore important to rest the
MPC indutrial workstation on a soft at that cannot damage the LCD screen on
the front of the DM series industrial monitor.