Clear-Com Production-Maestro-Pro Instruction Manuals and User Guides
We have 3 Instruction Manuals and User Guides for Production-Maestro-Pro Clear-Com
Manuals 
| Recognized languages: | English |
|---|---|
| Pages: | 2 |
| Size: | 139 KB |
| Recognized languages: | English |
|---|---|
| Pages: | 58 |
| Size: | 1.75 MB |
Show table of contents
Document Outline
- 1 Introduction
- 2 Installing Production Maestro Pro
- 3 Starting Production Maestro Pro
- 4 Using Production Maestro Pro
- 4.1 Getting started with Production Maestro Pro
- 4.2 Connecting to the matrices in an EHX system
- 4.3 Opening a project (layout) file
- 4.4 Saving a project (layout) file
- 4.5 Refreshing information from the matrices
- 4.6 Dragging and dropping
- 4.7 Undoing and redoing
- 4.8 Getting started with the palette
- 4.9 Getting started with the canvas
- 4.10 Full screen
- 4.11 Operational modes
- 4.11.1 Configure Palette mode
- Organizing and searching for items on the Configure Palette canvas
- Eraser tool and Meter tool
- Adding items to the palette Drag and drop the items you require ( such as panels, four-wires, idents, monitors and keygroups) from the canvas to the palette. Organize the items by dragging items anywhere on the palette. The items you add to the palett...
- Note: The location of the items on the palette is locked in Assignment mode. To relocate items on the palette, you must return to Configure Palette mode. You can navigate between different palette configurations using the tabs [ ] at the top ...
- 4.11.2 Configure Canvas mode
- 4.11.3 Alias mode
- 4.11.4 Assignment mode
- 4.11.1 Configure Palette mode
- 4.12 Controlling input and output levels
- 4.13 Preset conferences
- 4.14 Filtering members in conferences
- 4.15 Erasing changes to conferences
- 4.16 Controlling Talk and Listen buttons
- 4.17 Idents and monitors (split label ports)
- 4.18 Port Viewers
- 4.19 Using the Settings screen
- 4.20 Using audio level meters (Clear-Vu ®)
- 4.20.1 Adding a meter to a four-wire on the palette
- 4.20.2 Removing a meter from a four-wire on the palette
- 4.20.3 Adding a meter to a four-wire on the canvas (pre-populated Port Viewer)
- 4.20.4 Removing a meter from a four-wire on the canvas (pre-populated Port Viewer)
- 4.20.5 Adding a meter to a conference
- 4.20.6 Removing a meter from a conference
- 4.20.7 Dynamic meter
- 5 Glossary
| Recognized languages: | English |
|---|---|
| Pages: | 86 |
| Size: | 4.28 MB |
Show table of contents
Document Outline
- Software License
- a. These terms supersede all prior agreements representations and understandings between you the Customer and Clear-Com and their authorised representatives relating to the subject matter hereof (i.e., the Software) but shall otherwise be subject to ...
- b. No variation to these terms, nor any other terms or conditions proposed by you, shall be of any effect unless recorded in a written document signed by Clear-Com. You confirm that any statement made to the contrary by you or on your behalf shall no...
- c. You confirm that you are not relying on any statement made by or on behalf of Clear-Com, other than statements recorded in a written document signed by Clear-Com.
- d. Clear-Com and its licensors reserve all rights not expressly granted to you. Clear-Com's licensors are intended third party beneficiaries of this Agreement and have the express right to rely upon and directly enforce the terms set forth herein.
- e. You agree that the Software belongs to Clear-Com and its licensors. You agree that you neither own nor hereby acquire any claim or right of ownership to the Software or to any related patents, copyrights, trademarks or other intellectual property....
- a. The copyright and all other rights in the Software produced by Clear-Com shall remain with Clear-Com or its suppliers. You must reproduce any copyright or other notice marked on the Software on any copies that you make.
- a. Use the Software only as specified in the license (single site location or single user). If you wish to use the Software at more than one site or with more than one user you must contact Clear-Com and if required purchase further Licenses;
- b. Make one copy of the Software for archival or back-up purposes, and;
- c. Transfer the Software to an end user of a Clear-Com product, only if you have made it clear to Clear-Com that you are not the end user and you assign all of your rights under this License and make no use of the Software yourself.
- a. Use the Software or make copies of it except as permitted in this License;
- b. Publish or distribute the computer images, sound files or fonts included with the Software as computer images, sound files or fonts;
- c. Translate, reverse engineer, decompile or disassemble the Software, except to the extent the foregoing restriction is expressly prohibited by applicable law;
- d. Rent, lease, assign or transfer the Software except as set out above; or
- e. Modify the Software or merge all or any part of the Software in another program.
- a. This License shall continue for as long as you use the Software. However, it will terminate if you fail to comply with any of its terms or conditions. You agree, upon termination, to destroy all copies of the Software. The Limitations of Warrantie...
- a. Clear-Com warrants that the storage media in this Software will be free from defects in materials and workmanship for 90 days from the date you acquire it. If such a defect occurs, return it to us at the address below and we will replace it free. ...
- b. After the initial 90 days, THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND EITHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, PERFORMANCE, A...
- a. For the avoidance of doubt, all conditions imposed by law covering matters such as fitness for purpose, compliance to description, negligence and quality are expressly excluded from this agreement and you agree to accept the foregoing warranty in ...
- b. IN NO EVENT SHALL CLEAR-COM BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF DATA OR USE OF DATA, INTERRUPTION OF BUSINESS, OR FOR INDIRECT, SPECIAL, INCIDENTAL, EXEMPLARY, MULTIPLE, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY KIND, WHETH...
- c. The warranty is personal to you (or end user if you have made it clear that you are not the end user) and may not be transferred (except as permitted expressly above).
- d. Clear-Com shall not be a liable for failure to perform any obligation to you where such failure is due to circumstances beyond Clear-Com’s reasonable control.
- e. Clear-Com offers extended warranties and, if you are not satisfied with the above, you should consider such warranties or consider separate insurance.
- a. Any failure by Clear-Com to insist on its strict rights under this Agreement shall not be deemed to be a waiver of those (or any other rights) and only a duly executed written release shall constitute such a waiver.
- b. If any of these conditions is deemed invalid or unenforceable the remainder shall be unaffected.
- c. Clear-Com's dealings with you shall be governed by English law if you are resident in the EMEA region and California law if you are resident elsewhere. The federal and state courts of California for Non-EMEA Customers and English Courts for EMEA C...
- d. If any document is written in more than one language the English text shall prevail.
- e. Capitalized terms not defined herein shall have the meanings set forth in Clear-Com’s Terms and Conditions, as amended from time to time.
- Contents
- Eclipse Production Maestro
- Installation
- Glossary
- Limited Warranty
- Technical Support & Repair Policy