Clear-Com Production-Maestro-Pro - Manual (Page 12)

3 Starting Production Maestro Pro
This chapter describes how to start Production Maestro Pro (from both the Windows Start menu and
the command line).
Tip: To find out more about Production Maestro Pro as you work, see Help [ ] in the top right hand
corner of your Production Maestro Pro screen.
3.1 Starting Production Maestro Pro from the Start menu
To start Production Maestro Pro:
1. Go to Start [ ] > All Programs > Clear-Com [ ] > Production Maestro Pro [ ].
2. Click either of the following:
• Production Maestro Pro [ ].
• Production Maestro Pro (Simulation) [ ]. Simulation means that conference
and port information is read only from the project (*.hxn) file or Production Maestro
Information (*.hxpmi) file. No attempt is made to connect to a matrix.
Production Maestro Pro opens in Assignment mode, where assignments are made to
conferences and Port viewers.
Tip: Assignment mode is the main operational mode for Production Maestro Pro. For more
information about the different operational modes, see 4 Using Production Maestro Pro.
To change the operational mode at start up, see 3.2 Command line options below.
12 Production Maestro Pro User Guide
PN: 399G063 Rev: A 09/05/13