Clear-Com Production-Maestro-Pro - Manual (Page 21)

Clear-Com
Eclipse Production Maestro V5.2 User Manual 1 - 1 1
CONFIGURING CONFERENCES
Before Production Maestro can be used to configure conferences it
must be given an initial system layout file (ccn file) exported from ECS
(see ‘Export Project’ in the ECS manual part no. 810299Z). This file
provides Production Maestro with the initial IP addresses (see
“Connect” on page 1-6).
When Production Maestro connects to a matrix it obtains the current
active assignments from the matrix. All assignments made by
Production Maestro are sent directly to the matrix. If Production
Maestro loses the connection to the matrix all assignments that have
been made will remain in effect and any other Production Maestro
client connected to the matrix will still be able to make assignments.
Figure 1-11 below illustrates a conference setup (includes some
Production Maestro Pro mode features).
Figure 1-11: Production Maestro with Conference Setup Loaded
When the mouse pointer is hovered over an item in the canvas or
palette windows a tooltip about the item is displayed beside it.