Clear-Com Production-Maestro-Pro - Manual (Page 68)

Clear-Com
Eclipse Production Maestro V5.2 User Manual
2 - 1 0
for example /ASSOCIATED-PANEL=PORT.1.3 for port 3 on system 1.
/ASSOCIATED-METER-PORT - this option allows the system
administrator to set up a command line to specify the port on the matrix
that is connected to the PC audio input. This allows Production
Maestro to meter an audio level without using an LMC-64 card. The
format of the command line is:
/ASSOCIATED-METER-PORT=PORT..number>
Different Production Maestro PCs can use the same layout file but
different ports for audio metering in this way.
The Production Maestro startup parameters are:
Configuration File - including a system configuration path and filename
(.CCN) within/outside (as required for you operating system) the
quoted command line causes Production Maestro to automatically load
that system configuration file when it is run.
e.g. “C:\Program Files\ClearCom\Production Maestro\Production
Maestro.exe C:\Files\system.ccn”
Layout File - including a Production Maestro layout path and filename
(.CCR) within/outside (as required for you operating system) the
quoted command line causes Production Maestro to automatically load
that layout file when it is run.
e.g. “C:\Program Files\ClearCom\Production Maestro\Production
Maestro.exe C:\Files\layout.ccr”
LICENSING
All Eclipse matrix sales include a 31 day trial and can be used without
a licence on your Eclipse network. After 31 days run-time a passcode
licence will be required to continue to use Production Maestro. The
passcode license will allow Production Maestro to be used in Standard
or Pro mode depending on the license purchased.
Production Maestro licenses are available for up to 10 users per matrix
frame in the network. Each matrix that is required to participate with
Production Maestro or Production Maestro Pro requires a suitable
passcode licence in ECS. Site licences are available. For further
information please contact your Clear-Com distributor or Clear-Com
sales.The matrix license is input via System Preferences in ECS.
Production Maestro will check the license on the connected matrix or
matrices repeatedly during operation. If the matrix license ceases to
be available Production Maestro will disconnect from the matrix.
If you need to add more licences after adding participating linked
matrices or more Production Maestro users then please provide Sales
with a list of all the matrix IDs (from the event log) and new passcodes
can be provides for every participating matrix in the linked set.