Clear-Com Production-Maestro-Pro - Manual (Page 52)

4.20.4 Removing a meter from a four-wire on the canvas
(pre-populated Port Viewer)
To remove a meter from a four-wire you have dragged to the canvas (pre-populated Port Viewer):
1. Go to Configure Canvas.
2. Drag the attached audio meter away from the Port Viewer and drop it on the canvas.
4.20.5 Adding a meter to a conference
You can only add output meters to conferences, to measure the audio
levels being heard by the members of the conference.
To add a meter to a conference:
1. In Configure Canvas > Conferences tab, add the conference [ ] to the
canvas.
2. Select the Other tab. The meter control [ ] is displayed in the list of available
items.
3. To add the output meter, drag the meter control [ ] to the conference.
The meter is displayed on the right-hand side of the conference:
Figure 14: Conference with output meter attached
52 Eclipse Production Maestro Pro User Guide