Clear-Com Production-Maestro-Pro - Manual (Page 53)

Clear-Com
Eclipse Production Maestro V5.2 User Manual 1 - 4 3
palette to a conference when it is already present in a different
conference.
Figure 1-51: Item Assignment Prompt (Pro mode only)
If the ‘Cancel’ button is selected the item assignment will be cancelled.
If the ’Apply anyway’ button is selected the assignment will be
completed.
If a port is present in multiple conferences all the audio from those
conference will be present on that port, potentially making it impossible
for the port to be used to communicate with a single conference. Any
audio input from the port will be output to all the conferences it is
present in which may also be unwanted.
Eraser Leaves Monitors, Idents and Alias name
Selecting this setting (Pro mode only) modifies the action of the eraser
on conferences so that it will not delete monitors and idents added by
Production Maestro from conferences. If the conference name has
been modified by the use of an alias in Production Maestro the alias
name will be retained. All the other effects of the erase will remain the
same.
USER RESTRICTIONS
If Production Maestro is in Pro mode and has been started with the
“Admin” option additional settings are available (see the section on
command line options in the Installation chapter). These settings
enable an administrator to restrict the changes that an user can make
to a preset layout (.ccr file). These settings are saved in the layout file.
Once user restrictions are saved in the layout file they can only be
changed or removed by starting Production Maestro with the “Admin”
option and making the required changes and then saving the layout file
again.
If Production Maestro is not started with the “Admin” option the User
Restrictions settings menu is not displayed and the settings cannot be
changed.
In this way a system administrator can manage the activities of a
number of users by assigning them specific setups and elements that
Pro Mode Only