Clear-Com Production-Maestro-Pro - Manual (Page 29)

Clear-Com
Eclipse Production Maestro V5.2 User Manual 1 - 1 9
Figure 1-23: Using Preset Conferences
If an eraser is added to the preset conference and the preset
conference is then added to an existing conference the current
members will be erased and replaced by the members of the preset
conference.
Preset conferences are only created within Production Maestro and
are not sent to the matrix. Only when they are applied to existing
conferences are changes sent to the matrix.
Drag as Preset to a Conference
Existing conferences can also be used in the same way as preset
conferences using the “Drag as Preset” facility (Pro mode only). To
access this position the mouse pointer over the conference options
menu graphic to open the menu and click on “Drag as Preset” (see
Figure 1-24).
Pro Mode Only