Clear-Com Production-Maestro-Pro - Manual (Page 15)

4 Using Production Maestro Pro
This chapter describes how to use Production Maestro Pro, including:
• Opening and saving EHX Project (*.hxn), Production Maestro information (*.hxpmi) and
Production Maestro Pro project files (*.ccr).
• Navigating and using the palette and canvas screens, in the different operational modes
(Configure Palette, Configure Canvas, Alias and Assignment modes).
• Configuring and managing conferences, preset conferences and Port Viewers.
• Using Settings to control how conferences are configured and managed.
• Using Port Viewers to visually monitor and assign routing to and from four-wire ports, and
also create IFB systems.
• Assigning Alias labels to conferences and Port Viewers.
• Using audio level meters to meter audio levels for conferences and four-wire ports in real-
time.
The chapter also provides a quick reference to color coding in Production Maestro Pro, and the main
features of the Production Maestro Pro screen.
Note:
The use of audio level meters usually requires the fitting of at least one LMC-64 audio metering
interface card to a connected matrix. However, you can use the command line to enable some audio
metering without an LMC-64 (see 4.20 Using audio level meters (Clear-Vu ®)).
Tip: To find out more about Production Maestro Pro as you work, see Help [ ] in the top right hand
corner of your Production Maestro Pro screen.
15 Production Maestro Pro User Guide
PN: 399G063 Rev: A 09/05/13