Clear-Com Production-Maestro-Pro - Manual (Page 16)

Clear-Com
Eclipse Production Maestro V5.2 User Manual
1 - 6
USING PRODUCTION MAESTRO
PRODUCTION MAESTRO TOOLBAR BUTTONS
Connect
The ‘Connect’ button opens a dialog window and prompts for a
Clear-Com configuration (.ccn) file. The IP addresses of the matrices
in the configuration are extracted from the configuration file and IP
connections are made to these matrices. No other data such as port
lists is read from ccn files; information on ports, conferences and
keygroups (Pro mode only) is read live from the matrix or matrices.
This means that Production Maestro clients are automatically updated
with changes to the configuration made by the ECS application.
Note: Production Maestro can be run in simulation mode where
the port and conference information will be read from the
ccn file and no attempt will be made to connect to any
matrix.
Production Maestro can be run in simulation mode from the
programs menu or from a desktop shortcut using the
command line argument “/SIM” (see “Command Line
Options” on page 2-9 for more information).
.
Figure 1-8: Network Configuration File Open Dialog
While Production Maestro is attempting to connect to the matrices
referenced in the ccn file it will display the message ‘Connecting to’