Clear-Com Production-Maestro-Pro - Manual (Page 31)

Clear-Com
Eclipse Production Maestro V5.2 User Manual 1 - 2 1
INPUT AND OUTPUT
Interface input and output levels are displayed while they are in the
palette. If the mouse pointer is positioned on a device the device
parameters are displayed in a parameter window under the device.
Figure 1-25: Device Parameters in Production Maestro
The input or output level can be changed by selecting the input or
output level of the device and rolling the mouse wheel while it is
selected. The color and density of the level block changes as the level
changes from -72dB to +18dB changing from black to grey to
transparent to orange to red, with values around 0 being transparent.
The input or output value is displayed on the device and in the device
parameter window. If the level is set to -72dB it will displayed as “Cut”
rather than -72 on the device icon. The tooltip will display the level as
-72dB.
Figure 1-26: Input/Output Level Color Coding
Double clicking on an input or output level where the level can be
adjusted will automatically cut the audio by setting the level to -72dB
(Cut). Double clicking again will restore the level to its previous value.
If the mouse wheel is used to adjust the level while it is cut the
previous level is lost and the new level will be -72dB (Cut).