Clear-Com Production-Maestro-Pro - Manual (Page 13)

3.2 Command line options
You can use the command line to modify the way Production Maestro Pro runs at start up:
Command line option
Description
/SIM
Runs Production Maestro Pro in Simulation mode.
Note:
An entry to run Production Maestro Pro in simulation mode is
automatically created in the Start > All Programs at installation (see
above).
/ADMIN
Runs Production Maestro Pro in Administrator mode. Administrator
mode enables a system administrator to place restrictions on user
actions through a number of additional settings. These settings are
saved in the project file (provided that you save the file while in
Administrator mode).
/LAN2
Uses the secondary LAN’s IP addresses to connect to the linked set
(the group of linked matrices to which Production Maestro Pro connects.
This does not include PiCo).
/ASSOCIATED-PANEL
Allows the system administrator to set up a command line specifying the
associated panel to be used.
The format of the command line is:
/ASSOCIATED-PANEL=PORT..
Example:
/ASSOCIATED-PANEL=PORT.1.3 for port 3 on system 1.
/ASSOCIATED-METER-
PORT Allows the system administrator to set up a command line specifying
which port on the matrix is connected to the PC audio input.
This enables Production Maestro Pro to meter an audio level without
using an LMC-64 interface card.
The format of the command line is:
/ASSOCIATED-METER-PORT=PORT..
Tip: Different Production Maestro Pro PCs may use the same layout file
(but with different ports).
13 Eclipse Production Maestro Pro User Guide