Clear-Com Production-Maestro-Pro - Manual (Page 47)

Clear-Com
Eclipse Production Maestro V5.2 User Manual 1 - 3 7
To Add a Meter to a Conference on the Canvas
Only output meters can be added to conferences to indicate the audio
level being heard by the members of the conference. To add a meter
to a Conference:
1. Select Configure Canvas mode.
2. Add the desired conference to the canvas by selecting the
"Conferences" tab and dragging the required Conference to the
Canvas.
3. Select the "Other" tab to show the Meter control.
4. Drag the Meter control to the conference on the canvas. The meter
will appear to the right of the conference.
Figure 1-45: Conference with Meter
To remove a meter from a Conference:
1. Select ‘Canvas’ mode.
2. Select the meter to be removed.
3. Drag the meter away from the Conference and drop it onto the
canvas.
Cursor Meter
The cursor meter provides a single large meter, docked on the
right-hand-side of the screen, which can be used to dynamically meter
different points while in assignment mode.
To display the cursor meter click on the button on the right side of the
canvas. To hide the cursor meter click on the button again.