HP 2910AL - Manual (Page 596)

Monitoring Resources
Viewing Information on Resource Usage
RADIUS-based authentication, and other features (for an explanation of this
output, refer to the notes on page E-5).
ProCurve(config)# show access-list resources
Resource usage in Policy Enforcement Engine
| Rules | Rules Used
Ports | Available | ACL | QoS | IDM | VT | Other |
------+-------------+-------+-------+-------+-------+-------|
1-24 | 1994 | 10 | 5 | 0 | 0 | 3 |
| Meters | Meters Used
Ports | Available | ACL | QoS | IDM | VT | Other |
------+-------------+-------+-------+-------+-------+-------|
1-24 | 250 | | 5 | | | 0 |
| Application |
| Port Ranges | Application Port Ranges Used
Ports | Available | ACL | QoS | IDM | VT | Other |
------+-------------+-------+-------+-------+-------+-------|
1-24 | 31 | 1 | 0 | 0 | | 0 |
0 of 32 Policy Engine mangement resources used.
Key:
ACL = Access Control Lists
QoS = Device & Application Port Priority
IDM = Identity Driven Management
VT = Virus Throttling blocks
Other = Management VLAN, DHCP Snooping, ARP Protection.
Resource usage includes resources actually in use, or reserved for future
use by the listed feature. Internal dedicated-purpose resources, such as
port bandwidth limits or VLAN QoS priority, are not included.
Figure E-1. Example of Displaying Current Resource Usage on a Series 2910al Switch
E-4