beautypg.com

HP 2910AL User Manual

Page 268

background image

Power Over Ethernet (PoE+) Operation
PoE with LLDP

ProCurve(config)# show lldp info remote-device 3
LLDP Remote Device Information Detail

Local Port : 3
ChassisType : mac-address
ChassisId : 00 16 35 ff 2d 40
PortType : local
PortId : 23
SysName : ProCurve Switch
System Descr : ProCurve J9146A Switch 2910al-24G-PoE, revision W.14.XX
PortDescr : 23

System Capabilities Supported : bridge, router
System Capabilities Enabled : bridge

Remote Management Address
Type

: ipv4

Address : 10.0.10.10

Poe Plus Information Detail

Poe Device Type : Type2 PD
Power Source : Only PSE
Power Priority : High
Requested Power Value : 10 Watts
Actual Power Value : 10 Watts
Acknowledgement : Not part of ack/nack cycle

Figure 11-6. Example of LLDP Remote Device Information

11-18