HP 2910AL User Manual
Procurve switches
Table of contents
Document Outline
- HP ProCurve 2910al Switch Management and Configuration Guide
- Front Cover
- Title Page
- Copyright, Notices, & Publication Data
- Contents
- Feature Index
- 1.Getting Started
- 2.Selecting a Management Interface
- 3.Using the Menu Interface
- 4.Using the Command Line Interface (CLI)
- 5.Using the ProCurve Web Browser Interface
- 6.Switch Memory and Configuration
- Contents
- Overview
- Configuration File Management
- Using the CLI To Implement Configuration Changes
- Using the Menu and Web Browser Interfaces To Implement Configuration Changes
- Using Primary and Secondary Flash Image Options
- Multiple Configuration Files
- 7.Interface Access and System Information
- 8.Configuring IP Addressing
- Contents
- Overview
- IP Configuration
- Loopback Interfaces
- IP Preserve: Retaining VLAN-1 IP Addressing Across Configuration File Downloads
- 9.Time Protocols
- 10.Port Status and Configuration
- Contents
- Overview
- Viewing Port Status and Configuring Port Parameters
- Menu: Port Status and Configuration
- CLI: Viewing Port Status and Configuring Port Parameters
- Viewing Port Utilization Statistics
- Viewing Transceiver Status
- Enabling or Disabling Ports and Configuring Port Mode
- Enabling or Disabling Flow Control
- Configuring a Broadcast Limit on the Switch
- Configuring ProCurve Auto-MDIX
- Web: Viewing Port Status and Configuring Port Parameters
- Using Friendly (Optional) Port Names
- Uni-Directional Link Detection (UDLD)
- 11.Power Over Ethernet (PoE+) Operation
- 12.Port Trunking
- Contents
- Overview
- Port Trunk Features and Operation
- Trunk Configuration Methods
- Menu: Viewing and Configuring a Static Trunk Group
- CLI: Viewing and Configuring Port Trunk Groups
- Web: Viewing Existing Port Trunk Groups
- Trunk Group Operation Using LACP
- Trunk Group Operation Using the “Trunk” Option
- How the Switch Lists Trunk Data
- Outbound Traffic Distribution Across Trunked Links
- 13.Port Traffic Controls
- 14.Configuring for Network Management Applications
- Contents
- Using SNMP Tools To Manage the Switch
- Overview
- SNMP Management Features
- Configuring for SNMP version 1 and 2c Access to the Switch
- Configuring for SNMP Version 3 Access to the Switch
- SNMP Version 3 Commands
- SNMP Notifications
- Supported Notifications
- General Steps for Configuring SNMP Notifications
- SNMPv1 and SNMPv2c Traps
- Configuring an SNMP Trap Receiver
- Enabling SNMPv2c Informs
- Configuring SNMPv3 Notifications
- Managing Network Security Notifications
- Enabling Link-Change Traps
- Configuring the Source IP Address for SNMP Notifications
- Displaying SNMP Notification Configuration
- Advanced Management: RMON
- CLI-Configured sFlow with Multiple Instances
- LLDP (Link-Layer Discovery Protocol)
- Terminology
- General LLDP Operation
- Packet Boundaries in a Network Topology
- Configuration Options
- Options for Reading LLDP Information Collected by the Switch
- LLDP and LLDP-MED Standards Compatibility
- LLDP Operating Rules
- Configuring LLDP Operation
- LLDP-MED (Media-Endpoint-Discovery)
- Displaying Advertisement Data
- LLDP Operating Notes
- LLDP and CDP Data Management
- A.File Transfers
- Contents
- Overview
- Downloading Switch Software
- General Software Download Rules
- Using TFTP To Download Switch Software from a Server
- Using Secure Copy and SFTP
- The SCP/SFTP Process
- Using Xmodem to Download Switch Software From a PC or UNIX Workstation
- Using USB to Transfer Files to and from the Switch
- Switch-to-Switch Download
- Using PCM+ to Update Switch Software
- Copying Software Images
- Transferring Switch Configurations
- TFTP: Copying a Configuration File to a Remote Host
- TFTP: Copying a Configuration File from a Remote Host
- TFTP: Copying a Customized Command File to a Switch
- Xmodem: Copying a Configuration File to a Serially Connected PC or UNIX Workstation
- Xmodem: Copying a Configuration File from a Serially Connected PC or UNIX Workstation
- USB: Copying a Configuration File to a USB Device
- USB: Copying a Configuration File from a USB Device
- Transferring ACL Command Files
- Copying Diagnostic Data to a Remote Host, USB Device, PC or UNIX Workstation
- Using USB Autorun
- B.Monitoring and Analyzing Switch Operation
- Contents
- Overview
- Status and Counters Data
- Menu Access To Status and Counters
- General System Information
- Task Monitor—Collecting Processor Data
- Switch Management Address Information
- Port Status
- Viewing Port and Trunk Group Statistics and Flow Control Status
- Viewing the Switch’s MAC Address Tables
- Spanning Tree Protocol (MSTP) Information
- Internet Group Management Protocol (IGMP) Status
- VLAN Information
- Web Browser Interface Status Information
- Interface Monitoring Features
- Locating a Device
- C.Troubleshooting
- Contents
- Overview
- Troubleshooting Approaches
- Browser or Telnet Access Problems
- Unusual Network Activity
- General Problems
- 802.1Q Prioritization Problems
- ACL Problems
- IGMP-Related Problems
- LACP-Related Problems
- Mesh-Related Problems
- Port-Based Access Control (802.1X)-Related Problems
- QoS-Related Problems
- Radius-Related Problems
- Spanning-Tree Protocol (MSTP) and Fast-Uplink Problems
- SSH-Related Problems
- TACACS-Related Problems
- TimeP, SNTP, or Gateway Problems
- VLAN-Related Problems
- Fan Failure
- Using the Event Log for Troubleshooting Switch Problems
- Debug/Syslog Operation
- Diagnostic Tools
- Viewing Switch Configuration and Operation
- Restoring the Factory-Default Configuration
- Restoring a Flash Image
- DNS Resolver
- D.MAC Address Management
- E.Monitoring Resources
- F.Daylight Savings Time on ProCurve Switches
- Index
- Notices & Publication Data