HP 2910AL User Manual
Page 364
Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
The
show sflow <instance> sampling-polling [port-list] command displays infor
mation about sFlow sampling and polling on the switch. You can specify a list
or range of ports for which to view sampling information.
ProCurve# show sflow 2 sampling-polling A1-A4
Port | Sampling
+
---
Number denotes the sampling/polling instance to which the receiver is coupled.
Dropped
| Polling
| Enabled Rate
Header
Samples
| Enabled
Interval
----- + -------- -------- ------ ----------
-------
--------
A1
Yes(2)
40
128
1234567890
--
-
A2
---
---
---
0
Yes(1)
60
A3
No(1)
0
100
898703
No
30
A4
Yes(3)
50
128
0
No(3)
0
Figure 14-16. Example of Viewing sFlow Sampling and Polling Information
N o t e
The sampling and polling instances (noted in parentheses) coupled to a
specific receiver instance are assigned dynamically, and so the instance
numbers may not always match. The key thing to note is whether sampling or
polling is enabled on a port, and the sampling rates or polling intervals for the
receiver instance configured on each port.
14-36