HP 2910AL - Manual (Page 466)

Monitoring and Analyzing Switch Operation
Status and Counters Data
N o t e As shown in figure B-6, all VLANs on the switches use the same MAC address.
(This includes both the statically configured VLANs and any dynamic VLANs
existing on the switch as a result of GVRP operation.)
Also, the switches covered in this guide use a multiple forwarding database.
When using multiple VLANs and connecting a switch to a device that uses a
single forwarding database, such as a Switch 4000M, there are cabling and
tagged port VLAN requirements. For more on this topic, refer to the section
titled “Multiple VLAN Considerations” in the “Static Virtual LANs (VLANs)
chapter of the Advanced Traffic Management Guide for your switch.
CLI Access
Syntax: show management
Port Status
The web browser interface and the console interface show the same port
status data.
Menu: Displaying Port Status
From the Main Menu, select:
1. Status and Counters …
4. Port Status
B-10