HP 2910AL User Manual

Page 54

Using the Menu Interface
Starting and Ending a Menu Session

Asterisk indicates a
configuration change
that requires a reboot
to activate.

Figure 3-2. Example Indication of a Configuration Change Requiring a Reboot

1. In the current session, if you have not made configuration changes that

require a switch reboot to activate, return to the Main Menu and press

[0]

(zero) to log out. Then just exit from the terminal program, turn off the
terminal, or quit the Telnet session.

2. If you have made configuration changes that require a switch reboot—

that is, if an asterisk (*) appears next to a configured item or next to

Switch

Configuration in the Main Menu:

a. Return to the Main Menu.

b. Press

[6]

to select

Reboot Switch and follow the instructions on the

reboot screen.

Rebooting the switch terminates the menu session, and, if you are using
Telnet, disconnects the Telnet session.

3. Exit from the terminal program, turn off the terminal, or close the Telnet

application program.

3-6