HP 2910AL - Manual (Page 560)

Troubleshooting
Viewing Switch Configuration and Operation
Syntax: copy <source> show- tech
Includes the output of a specified command in show-tech
command output. Enter the command name between
double-quotation marks; for example,
copy “show system”
show-tech.
crash-data [slot-id | master]:
Includes the crash data from all management and interface
modules in
show tech command output.
To limit the amount of crash data displayed, specify an
installed module or management modules, where:
slot-id: Includes the crash data from an installed module.
Valid slot IDs are the letters
a through h.
master: Includes the crash data from both management
modules.
.
Syntax: copy <source> show- tech
crash-log [slot-id | master]:
Includes the crash logs from all management and interface
modules in
show tech command output.
To limit the amount of crash-log data displayed, specify an
installed module or management modules, where:
slot-id: Includes the crash log from an installed module.
Valid slot IDs are the letters
a through h.
master: Includes the crash log from both management
modules.
event-log
Copies the contents of the Event Log to show tech command
output.
running-config
Includes the contents of the running configuration file in
show tech command output.
startup-config
Includes the contents of the startup configuration file in
show tech command output.
C-72