HP 2910AL - Manual (Page 266)

Power Over Ethernet (PoE+) Operation
PoE with LLDP
Displaying PoE When Using LLDP Information
Displaying LLDP Port Configuration
To display information about LLDP port configuration, use the show lldp config
command.
Syntax: show lldp config
Displays the LLDP port configuration information, including the
TLVs advertised.
ProCurve(config)# show lldp config 4
LLDP Port Configuration Detail
Port : 4
AdminStatus [Tx_Rx] : Tx_Rx
NotificationEnabled [False] : False
Med Topology Trap Enabled [False] : False
TLVS Advertised:
* port_descr
* system_name
* system_descr
* system_cap
* capabilities
* network_policy
* location_id
* poe
* macphy_config
* poeplus_config
IpAddress Advertised:
Figure 11-4. Example of LLDP Port Configuration Information with PoE
Displaying Local Device Power Information
To view information about local PoE devices and power usage, use this
command.
11-16