HP 2910AL - Manual (Page 569)

Troubleshooting
Viewing Switch Configuration and Operation
/
+---core
| mm1.core management module or management function
| port_1-24.core core dump for ports 1-24 (stackable switches only)
| port_25-48.core core dump for ports 25-48 (stackable switches only)
For more on using SFTP/SCP to transfer files, refer to the “File Transfers”
appendix of the Management and Configuration Guide for your switch.
CLI: Displaying Core Dump Information
The show boot-history command will indicate if any core dump files exist on
the switch.
Syntax: show boot-history
Displays any core dump files saved in the file system.
ProCurve(config)# show boot-history
Master -- Saved Crash Information (most recent first):
======================================================
SubSystem 0 went down: 07/16/08 23:29:10
Operator cold reboot from CONSOLE session.
No Core-Dump Files
CLI: Deleting Core Dump Files
To delete a core dump file from the file system, use the erase core-dump <file­
name> command.
Web: Enabling/Disabling Core Dump
To enable or disable the core dump feature via the Web UI or to verify current
core dump status (enabled or disabled), follow the steps below:
1. Navigate to the Diagnostics -> Core Dump tab.
The core dump window appears showing the current configuration status
(checked = enabled; or unchecked = disabled).
C-81