Canon imageCLASS MF275dw Wireless All-In-One Monochrome Laser Printer - Manual (Page 77)

When the machine is connected to the wireless LAN, [ ] appears on the [Home] screen and screen of
each function.
7
Wait a few minutes.
➠ By default, an IP address is set automatically.
To use a specific IP address, set this manually.
Setting IPv4 Addresses(P. 71)
Setting IPv6 Addresses(P. 75)
If an Error Message Appears during Operation and a Connection Cannot Be Established
● Press [Close], check the information of the wireless LAN router to which you want to connect, and repeat the
procedure starting from Step 2.
5 Lines LCD Model
Required Preparations
● Prepare the information of the wireless LAN router to which you want to connect, and keep it close by.
Wireless LAN Router Information Required for Connection(P. 56)
● When connecting to a wireless LAN router supporting WPA-EAP or WPA2-EAP for the security standard, set
IEEE 802.1X. Using IEEE 802.1X(P. 313)
1
On the operation panel, select [Wireless LAN Set.] in the [Home] screenand press .
[Home] Screen(P. 113)
➠ The [Select Network] screen is displayed.
● If the login screen appears, enter the System Manager ID and PIN, and then press . System
Manager ID and PIN(P. 5)
● If the message [Enable the wireless LAN?] appears, select [Yes] and press .
● If the message [Cannot find the access point.] appears, select [Close] and press .
2
Select [Other Connections] and press .
3
Select [Manually Enter Network Name] and press .
➠ The SSID input screen is displayed.
4
Enter the SSID, select [], and press .
➠ The [Security Settings] screen is displayed.
Setting Up
68