Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 81)

OMS OMNEO Main Station Status | Network menu | en 81
Bosch Security Systems, LLC Technical Manual 01-2021 | 03 | F.01U.380.820
14 Status | Network menu
The Network menu item is used to view information about the following network connections:
– Control Port
– OMNEO (SFP)
– OMNEO (RJ45)
– RVON
Figure 14.1: Status | Network | Menu
14.1 Control port
The Control Port screen is used to view the Control Port network status information. The
Control Port is the physical interface for the computer running AZedit.
Figure 14.2: Status | Network | Control Port
Link Up Field
The Link Up field displays the status of data communication on the port.
Available statuses are:
The Ethernet link is up
The port is configured (has an IP address) but the link is not up
The control port is not configured (has no IP address)
Speed Field
The Speed field displays the transmission speed of the Control Port interface.
There are three speeds the Ethernet links support: 10 Mbps, 100 Mbps, or 1 Gbps.
Duplex Field
The Duplex field displays the transmit mode the network is currently operating- Half or Full
Duplex.
Available options for this field are:
Half-Duplex Can either transmit or receive, but not both simultaneously
Full-Duplex Can transmit and receive simultaneously
14.2 OMNEO (SFP)
The OMNEO (SFP) screen is used to view the OMNEO (SFP) network status.