Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 144)

144 en | Intercom setup | Resources menu OMS OMNEO Main Station
01-2021 | 03 | F.01U.380.820 Technical Manual Bosch Security Systems, LLC
30 Intercom setup | Resources menu
Use the Resources menu to setup intercom resources in the intercom.
Figure 30.1: Intercom Setup | Resources
30.1 Party line
Use the Party Line screen to configure party line membership and options. A party line system
is a system in which a number of participants are involved in the same conversation. Party line
systems are full-duplex conversations, meaning each person involved in a call talk
simultaneously with others. It is a public conversation.
Figure 30.2: Intercom Setup | Resources | Party Line
PL Field
Use the PL field to select the party line to configure.
Port Field
Use the Port field to select the port to view or modify the party line membership.
Talker Check Box
The Talker check box designates the selected port as a permanent talker on the current party
line. This means the port is always talking. The permanent talkers are usually only used with
devices that cannot turn talk keys on and off. Keypanels normally do not have this option
configured.
Listener Check Box
The Listener check box designates the select port as a permanent listener on the current
party line assignment. This means the port is always listening. The permanent listeners are
usually only used with devices that cannot turn listen keys on and off. Keypanels normally do
not have this option configured.
Scroll Enable Check Box
The Scroll Enable check box determines whether the current PL is visible in the local scroll
list.
Latch Disable Check Box
The Latch Disable check box determines whether the party line, when assigned to a key,
causes the key to become latch disabled. Clear the latch disable for the key after making the
assignment to disable this option.
Tally Enable Check Box
The Tally Enable check box determines whether the party line, if enabled, keypanel keys that
have this key assignment tally when a user talks to the party line.
To
configure a party line , do the following:
1. Navigate to the PL field .