Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) User Manual
Page 32
32
en | Intercom configuration
OMS OMNEO Main Station
01-2021 | 03 | F.01U.380.820
Technical Manual
Bosch Security Systems, LLC
5.
Navigate to the
RVON icon
.
6.
Click the
ENC2 encoder knob
.
The RVON Channels screen displays.
7.
Navigate to the
Port field
.
8.
Click the
ENC2 encoder knob
.
The field becomes active.
9.
Scroll to the
desired port
.
10. Click the
ENC2 encoder knob
.
The field is changed.
11. Navigate to the
IP Address field
.
12. Click the
ENC2 encoder knob
.
The field becomes active.
13. Enter the
IP Address of the partner device
to connect to this port.
14. Click the
ENC2 encoder knob
.
The field turns yellow (modification made, but not confirmed).
15. Navigate to the
Codec field
.
16. Click the
ENC2 encoder knob
.
The field becomes active.
17. Select the
codec
to use.
18. Click the
ENC2 encoder knob
.
The field turns yellow (modification made, but not confirmed).
19. Navigate to the
Device Type field
.
20. Click the
ENC2 encoder knob
.
The field becomes active.
21. Scroll to the
RVON device type
of the partner device.
22. Click the
ENC2 encoder knob
.
The field turns yellow (modification made, but not confirmed).
23. Navigate to the
Packet Size field
.
24. Click the
ENC2 encoder knob
.
The field becomes active.
25. Select the
packet size
to use.
26. Click the
ENC2 encoder knob
.
The field turns yellow (modification made, but not confirmed).
27. Navigate to the
channel field
.
28. Click the
ENC2 encoder knob
.
The field becomes active.
29. Scroll to the
Channel on the partner device
.
30. Click the
ENC2 encoder knob
.
The field turns yellow (modification made, but not confirmed).
31. Navigate to the
VAD field
.
32. Click the
ENC2 encoder knob
.
The field becomes active.