Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 129)

OMS OMNEO Main Station Configuration | Advanced menu | en 129
Bosch Security Systems, LLC Technical Manual 01-2021 | 03 | F.01U.380.820
User Field
Use the User field to select which user profile to view and modify.
Up to 20 user profiles can be created.
Admin Check Box
The Admin check box determines whether the user profile has administrative rights.
The default for this field is the admin rights are enabled.
Name Field
Use the Name field to enter the name of a user or group. For example, the name could be an
individual user such as John Adams; or the name could be a group, such as comms, where a
group of users can use the same profile.
Password Field
Use the Password field is to enter a password for logging in. This field is optional.
26.1.2 IPedit
Use the IPedit Authentication screen to define the access privileges (read, write, or admin)
for each user profile defined. When the Write and Admin check boxes both display red Xs,
Read privilege is applied.
Up to five user profiles can be created in the authentication table.
Figure 26.4: Configuration | Authentication | IPedit
User Field
Use the User field to select which user profile to view and modify.
Write Check Box
The Write check box determines whether the user profile has Write privileges.
Admin Check Box
The Admin check box determines whether the user profile has administrative rights.
Name Field
Use the Name field to enter the name of a user or group. For example, the name could be an
individual user such as John Adams; or the name could be a group, such as comms, where a
group of users can use the same profile.
Password Field
Use the Password field to enter a password used to log into IPedit with the defined user
profile.
The field is optional.
26.1.3 Front panel
Use the Front Panel screen to configure different access areas on the device, such as Front
Panel access, Status menu access, Setup menu access, and Configuration menu access.
i
Notice!
PINs are hierarchical. Whenever a PIN is entered, access to the highest level of PIN entered is
granted. If all three PINs are set, front panel access is PIN protected because a Status PIN is
defined. However, if the Setup PIN is set, access to Status is granted, but access to the
Configuration menu is not. If the user knows the Config PIN full access is granted.