Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 152)

152 en | Intercom setup | Gains menu OMS OMNEO Main Station
01-2021 | 03 | F.01U.380.820 Technical Manual Bosch Security Systems, LLC
Figure 31.4: Intercom Setup | Gains | Party Line
Port Field
Use the Port field to select the desired port’s party line listen gains to view or modify.
Listening To Field
Use the Listening To field to select the party line to which the selected port is listening.
PL Gain Field
Use the PL Gain field to select the gain at which the selected port hears the selected party
line.
The range for this field is -80 dB to +6.0 dB, and Mute.
To
adjust the party line gain , do the following:
1. Navigate to the Port field .
2. Click the ENC2 encoder knob .
The field becomes active.
3. Select the desired port .
4. Click the ENC2 encoder knob to confirm .
5. Navigate to the Listening To field .
6. Click the ENC2 encoder knob .
The field becomes active.
7. Select the desired listening to gain amount .
8. Click the ENC2 encoder knob to confirm .
9. Navigate to the PL Gain field .
10. Click the ENC2 encoder knob .
The field becomes active.
11. Select the desired output gain amount .
12. Click the ENC2 encoder knob to confirm .
13. Click the ENC1 encoder knob to exit the screen .
A Changes Made message appears.
14. Navigate to the desired action .
15. Click the ENC2 encoder knob to confirm the selection .