Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 155)

OMS OMNEO Main Station Alarms menu | en 155
Bosch Security Systems, LLC Technical Manual 01-2021 | 03 | F.01U.380.820
33 Alarms menu
The Alarms menu is used to access alarm notifications of events that occur in the intercom
system.
Figure 33.1: Alarms Menu
When an alarm occurs, an Alarm Notification message appears on the front display. To clear
this message, press the CLR button on the keypad. The CLR button hides the popup, but the
alarm remains unacknowledged. Pressing the SHIFT button, and then the CLR button on the
popup, automatically acknowledges all of the new alarms (33 as shown below). The number of
new alarms display in the upper right corner of the popup window. Use the ENC2 encoder
knob or the left/right arrow buttons to scroll through the alarms.
Figure 33.2: Alarm Popup Message
When an alarm occurs when the local keypanel screen is active, instead of getting a popup, an
alarm icon appears on the right side of the display screen.
Figure 33.3: Alarm - Local Keypanel
33.1 Alarms | Unacknowledged
Unacknowledged Alarms are alarms that have not been acknowledged. These alarms appear
in the Alarms | Unacknowledged screen.
Figure 33.4: Alarms | Unacknowledged
The Acknowledged and Active Alarms list can have up to 20 alarms displayed and scrollable.
More than 20 alarms are pushed to a new page.
Figure 33.5: Alarms Next Page Button
To acknowledge an alarm , do the following: