Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 156)

156 en | Alarms menu OMS OMNEO Main Station
01-2021 | 03 | F.01U.380.820 Technical Manual Bosch Security Systems, LLC
1. Navigate to the Unacknowledged Alarms icon .
2. Click the ENC2 encoder knob .
The Unacknowledged Alarms list displays.
3. Navigate to the desired alarm to acknowledge .
4. Click the ENC2 encoder knob to confirm .
5. Navigate to the Acknowledge button .
6. Click the ENC2 encoder knob .
The alarm is acknowledged and cleared from the unacknowledged alarm list. A green
check mark can be seen in the Active Alarm list indicating it is acknowledged.
i
Notice!
Press the SHIFT+SEL buttons to prompt acknowledgment of ALL alarms at once.
33.2 Alarms | Active
Active Alarms are alarm notifications that are currently active. There are two types of alarms
seen on this screen: clearable and non-clearable alarms.
Clearable
Alarms Non-serious issues that are more notification than alarm. Clearable alarms
display a red X icon at the right edge. These alarms are removable from the
alarm list.
Non-Clearable
Alarms More serious issues that must be resolved and are not removable from the
alarm list until the problem is fixed.
i
Notice!
The first check box indicates if the alarm has been acknowledged.