Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) - Manual (Page 17)

OMS OMNEO Main Station Installation | en 17
Bosch Security Systems, LLC Technical Manual 01-2021 | 03 | F.01U.380.820
6 Installation
– If installed in a closed or multi-unit rack assembly, the operating ambient temperature of
the rack environment may be greater than the room ambient temperature. Therefore,
special consideration should be given to installing the equipment in an environment
compatible with the specified maximum ambient operating temperature.
– The device is to be connected to mains socket outlet with a protective earth connection.
Particular attention should be given to power supply connections other than direct
connection to the mains socket. This includes using power strips with earth grounding.
– Consideration should be taken to ensure the mains power supply current and voltage
meet the rating specified on the equipment name plate.
i
Notice!
OMS acts as a common connection point for the ground connections associated with the
power supply.
6.1 System Interface Requirements
AZedit V5.5.0 or later
IPedit V3.7.0 or later
ODIN V1.2.0 or later
KP Series V2.5.0 or later
KP Series-RVON V1.6.0 or later
RVON-KP / RVON-IO / RVON-16 / RVON-C V2.7.0 or later
OMI V6.6.0 or later
OKI V6.6.0 or later
OEI-2 V2.6.0 or later
ROAMEO V8.3.1 or later
DBP V1.0.0 or later