31 intercom setup | gains menu, 1 i/o, Intercom setup | gains menu – Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) User Manual
Page 150: Make. see, Intercom setup | gains
150
en | Intercom setup | Gains menu
OMS OMNEO Main Station
01-2021 | 03 | F.01U.380.820
Technical Manual
Bosch Security Systems, LLC
31
Intercom setup | Gains menu
Use the
Gains
menu to set I/O gains, crosspoint gains, and party line gains.
Figure 31.1:
Intercom Setup | Gains Menu Icons
31.1
I/O
Use the
I/O
screen to configure input and output gain for selected ports in the intercom
system. When an intercom port interfaces with an external device operating at a different
audio level than the intercom system, input and output gain adjustments are made to align the
audio levels.
Figure 31.2:
Intercom Setup | Gains | I/O
Port Field
Use the
Port
field to select the desired port’s gain to view or modify.
Input Gain Field
Use the
Input Gain
field to set the amount of gain, in dB, applied to the selected port’s input
audio.
The range for this field is +20 dB to -20 dB.
Output Gain Field
Use the
Output Gain
field to set the amount of gain, in dB, applied to the selected port’s
output audio.
The range for this field is +20 dB to -20 dB.
To
adjust the I/O gain
, do the following:
1.
Navigate to
the Port field
.
2.
Click the
ENC2 encoder knob
.
The field becomes active.
3.
Select the
desired port
.
4.
Click the
ENC2 encoder knob to confirm
.
5.
Navigate to the
Input Gain field
.
6.
Click the
ENC2 encoder knob
.
The field becomes active.
7.
Select the
desired input gain amount
.
8.
Click the
ENC2 encoder knob to confirm
.
9.
Navigate to the
Output Gain field
.
10. Click the
ENC2 encoder knob
.
The field becomes active.
11. Select the
desired output gain amount
.
12. Click the
ENC2 encoder knob to confirm
.