2 auto dial, Auto dial – Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) User Manual
Page 118
118
en | Configuration | Local Keypanel menu
OMS OMNEO Main Station
01-2021 | 03 | F.01U.380.820
Technical Manual
Bosch Security Systems, LLC
6.
Click the
ENC2 encoder knob
.
7.
Turn the
ENC2 encoder knob
to move the focus to Exclusive.
8.
Click the
ENC2 encoder knob
.
9.
Tap the desired
talk key
to assign the exclusive assignment.
The key tile highlights with a red bar indicating which key is configured with the exclusive
key option.
Auto Dial
Auto Dial
stores commonly used phone numbers in the auto dial list locally on the device.
You can configure 1-Touch TIF Auto Dial numbers and configure those saved numbers to a
device key. Once configured, pressing the assigned key causes the TIF to go off-hook and auto
dial the configured number.
To
assign an auto dial to a device key
, do the following:
1.
Navigate to the
Configuration icon
.
2.
Click the
ENC2 encoder knob
.
3.
Navigate to the
Local Keypanel icon
.
4.
Click the
ENC2 encoder knob
.
5.
Navigate to the
Key Options icon
.
6.
Click the
ENC2 encoder knob
.
7.
Turn the
ENC2 encoder knob
to move the focus to Auto Dial.
8.
Click the
ENC2 encoder knob
.
9.
Tap the desired
talk key
to assign the auto dial assignment.
10. Turn the
ENC2 encoder knob
or press
the up arrow key
to select the desired auto dial.
The key tile highlights with a red bar indicating which key is configured with an auto dial
number.
24.2
Auto dial
Auto dial
stores commonly used phone number in the auto dial list locally on the device.
To configure a key on the device to have an auto dial number, refer to
Figure 24.3:
Configuration | Local Keypanel | Auto Dial Screen
Slot Field
Use the
Slot
field to select the entry number for the auto dial number. This number does not
need to follow sequence.
Number Field
Use the
Number
field to enter a phone number to assign as an auto dial.
The device allows up to 100 auto dial entries.
To
store an auto dial number
, do the following:
1.
Navigate to the
Configuration icon
.
2.
Click the
ENC2 encoder knob
.
3.
Navigate to
Local Keypanel
.
4.
Click the
ENC2 encoder knob
.
5.
Navigate to
Auto Dial
.
6.
Click the
ENC2 encoder knob
.
7.
Turn the
ENC2 encoder knob
or press the
up arrow key
on the keypad to select the
desired slot.