beautypg.com

Telex RTS OMS OMNEO Main Station Advanced Digital Partyline Intercom Base (5-Pin Female) User Manual

Page 149

background image

OMS OMNEO Main Station

Intercom setup | Resources menu | en

149

Bosch Security Systems, LLC

Technical Manual

01-2021 | 03 | F.01U.380.820

Figure 30.6:

Intercom Setup | Resources | ISO

ISO Field

Use the

ISO

field to select the ISO to configure.

Output Field

Use the

Output

field to enter the port number of the port to isolate when the ISO key is

pressed.

ISO Self Check Box

The

ISO Self

check box determines whether the ISO caller is isolated (as well as the target) so

both ends only hear each other. Normal intercom operation automatically restores after
releasing the ISO key.

Scroll Enable Check Box

The

Scroll Enable

check box determines whether the current ISO is visible in the local scroll

list.

Latch Disable Check Box

The

Latch Disable

check box determines whether the ISO, when assigned to keys, causes the

key to become latch disabled. After making the assignment, clear the latch disable to override
the latch disable for the key.
To

configure an ISO

, do the following:

1.

Navigate to

the ISO field

.

2.

Click the

ENC2 encoder knob

.

The field becomes active.

3.

Select the

desired ISO

.

4.

Click the

ENC2 encoder knob to confirm

.

5.

Navigate to the

Scroll Enable check box

.

6.

Click the

ENC2 encoder knob to enable or disable scroll enable

.

7.

Navigate to the

Output field

.

8.

Click the

ENC2 encoder knob

.

The field becomes active.

9.

Select the

desired output port

.

10. Click the

ENC2 encoder knob to confirm

.

11. Navigate to the

Latch Disable check box

.

12. (Optional) Click the

ENC2 encoder knob to enable or disable latch disable

.

13. Click the

ENC2 encoder knob to confirm

.

14. Navigate to the

ISO Self? check box

.

15. Click the

ENC2 encoder knob to enable or disable ISO Self

.

16. Click the

ENC2 encoder knob to confirm the selection

.

17. Click the

ENC1 encoder knob to exit the screen

.

A Changes Made message appears.

18. Navigate to the

desired action

.

19. Click the

ENC2 encoder knob to confirm the selection

.