ProSoft Technology MVI71-DFNT - Manual (Page 88)

Reference MVI71-DFNT ♦ PLC 5
User Manual EtherNet/IP Client/Server Communication Module
Page 88 of 175 ProSoft Technology, Inc.
February 3, 2011
5.5 MVI71-DFNT Status Data Definition
This section contains a description of the members present in the status data
blocks returned to the PLC processor under ladder logic control. The five blocks,
250, 251, 252, 253, and 254, are requested and returned in the module’s M1 file
in the command control data area under ladder logic control.
The data set returned to the processor in the M1 file for a 250 request has the
following definition:
5.5.1 BTR Response Block (250)
Offset Content Description
0 Block read ID This word contains the value of 250 to indicate this
specific status block
1 Block Write ID This word contains the next write block to receive
from the processor.
2 Program Scan Count This value is incremented each time a complete
program cycle occurs in the module.
3 to 4 Product Product Name (ASCII)
5 to 6 Rev Revision (ASCII)
7 to 8 Op Sys Operating System (ASCII)
9 to 10 Run Production Run Number (ASCII)
Reserved
Offset Content Description
11 Not Used Reserved
12 Not Used Reserved
13 Not Used Reserved
14 Not Used Reserved
15 Not Used Reserved
16 Not Used Reserved
17 Not Used Reserved
18 Not Used Reserved
19 Not Used Reserved
20 Not Used Reserved