ProSoft Technology MVI71-DFNT User Manual
Page 37

MVI71-DFNT ♦ PLC 5
Installing and Configuring the Module
EtherNet/IP Client/Server Communication Module
User Manual
ProSoft Technology, Inc.
Page 37 of 175
February 3, 2011
Parameter
Range
Description
Function Code See Command
Function Codes (page
These parameters specify the function to be executed by the command. The
Reference chapter in this manual describes the meaning of these values for
each of the available supported commands. Following is a complete list of the
command supported by the Client driver.
Function Code Listing
Basic Command Set
1
Protected Write
2
Unprotected Read
3
Protected Bit Write
4
Unprotected Bit Write
5
Unprotected Write
PLC-5 Command Set (0x0F)
100
Word Range Write (Binary Address)
101
Word Range Read (Binary Address)
102
Read-Modify-Write (Binary Address)
150
Word Range Write (ASCII Address)
151
Word Range Read (ASCII Address)
152
Read-Modify-Write (ASCII Address)
SLC Command Set (0x0F)
501
Prot Typed Read with 2 addr fields
502
Prot Typed Read with 3 addr fields
509
Prot Typed Write with 2 addr fields
510
Prot Typed Write with 3 addr fields
511
Prot Type Write with Mask 3 addr field
Function
Parameters
See Command
Function Codes (page
The number of auxiliary parameters required depends on the function code
selected for the command.