ProSoft Technology MVI71-DFNT - Manual (Page 102)

Reference MVI71-DFNT ♦ PLC 5
User Manual EtherNet/IP Client/Server Communication Module
Page 102 of 175 ProSoft Technology, Inc.
February 3, 2011
5.5.8 Pass-Through Server Configuration Error Word
The format of the pass-through server configuration error word is as follows:
Bit Description Value
0 Invalid enable code 0x0001
1 Invalid busytimeout setting (< 100 milliseconds) 0x0002
2 0x0004
3 0x0008
4 0x0010
5 Invalid baud rate 0x0020
6 Invalid parity 0x0040
7 Invalid data bits 0x0080
8 Invalid stop bits 0x0100
9 0x0200
10 0x0400
11 0x0800
12 0x1000
13 0x2000
14 0x4000
15 0x8000
5.5.9 Pass-Through Server State Parameter
The values for the pass-through server state parameter have the following
definition:
State Definition
-1 Listen function called to set up server
0 Waiting for connection to be established on server
1 Waiting and processing data received
2 Waiting for pass-through port to be free
3 Pass-through server owns port and processes all data received and written.
100 Closing server on program termination
1000 Initiate a close on the server
1001 Waiting for server to successfully close
The connection state for the pass-through server is not used at this time.