beautypg.com

Setting jumpers – ProSoft Technology MVI71-DFNT User Manual

Page 14

background image

Start Here

MVI71-DFNT ♦ PLC 5

User Manual

EtherNet/IP Client/Server Communication Module

Page 14 of 175

ProSoft Technology, Inc.

February 3, 2011

1.3 Setting Jumpers

The Setup Jumper acts as "write protection" for the module’s flash memory. In

"write protected" mode, the Setup pins are not connected, and the module’s

firmware cannot be overwritten. Do not jumper the Setup pins together unless

you are directed to do so by ProSoft Technical Support.
The following illustration shows the MVI71-DFNT jumper configuration.

Note: If you are installing the module in a remote rack, you may prefer to leave the Setup pins

jumpered. That way, you can update the module’s firmware without requiring physical access to

the module.