ProSoft Technology MVI71-DFNT - Manual (Page 156)

Reference MVI71-DFNT ♦ PLC 5
User Manual EtherNet/IP Client/Server Communication Module
Page 156 of 175 ProSoft Technology, Inc.
February 3, 2011
Fill in the M ULTI H OP tab portion of the dialog box as shown in the following
illustration.
Set the IP address value to the module’s Ethernet IP address. You must press
the "Insert" key to add the second line for ControlLogix Backplane and set the
slot number to zero.
5.16.5 RSView Software
RSView is a client application for building user interfaces to control systems. This
tool requires RSLinx to be loaded and operational (refer to the RSLinx section of
this document). In order to interface RSView to a DFNT module, the following
steps are required:
First select the
C HANNEL option from the E DIT M ODE tab as shown in the following
window.