ProSoft Technology MVI71-DFNT - Manual (Page 161)

MVI71-DFNT ♦ PLC 5 Reference
EtherNet/IP Client/Server Communication Module User Manual
ProSoft Technology, Inc. Page 161 of 175
February 3, 2011
Select the COM Port (configured during the previous step) and click on Auto-
Config.
Step 4- Use the New Driver to Connect to the PLC
You can now use the new driver created during the previous step to access the
PLC processor.
Open the RSLogix 5 and click on
Comms > System Comms in order to view all
configured drivers.
Click on the newly created driver. The PLC 5 processor appears on the screen.
Select the processor and click
Online.