ProSoft Technology MVI71-DFNT - Manual (Page 78)

Reference MVI71-DFNT ♦ PLC 5
User Manual EtherNet/IP Client/Server Communication Module
Page 78 of 175 ProSoft Technology, Inc.
February 3, 2011
The internal database of the DFNT module is used as the source (read requests)
and destination (write requests) for requests from remote clients. Access to the
database depends on the MSG command type executed to interface with the
database. The following table defines the relationship of the module’s internal
database to the addresses required in the MSG instructions:
MSG Instruction Type
Database Address PLC2 PLC5 or SLC ControlLogix
PCCC
CIP Integer
0 0 N10:0 N10:0 Int_data[0]
999 999 N19:99 N19:99 Int_data[999]
1000 1000 N20:0 N20:0 Int_data[1000]
1999 1999 N29:99 N29:99 Int_data[1999]
2000 2000 N30:0 N30:0 Int_data[2000]
2999 2999 N39:99 N39:99 Int_data[2999]
3000 3000 N40:0 N40:0 Int_data[3000]
3999 4000 N49:99 N49:99 Int_data[3999]
MSG Instruction Type
Database
Address
CIP Boolean ControlLogix
CIP Bit Array CIP Byte
CIP Double
Int
CIP Real
0 BoolData[0] BitAData[0] SIntData[0] DIntData[0] RealData[0]
999 BoolData[15984] SIntData[1998]
1000 BoolData[16000] BitAData[500] SIntData[2000] DIntData[500] RealData[500]
1999 BoolData[31984] SIntData[3998]
2000 BoolData[32000] BitAData[1000] SIntData[4000] DIntData[1000] RealData[1000]
2999 BoolData[47984] SIntData[5998]
3000 BoolData[48000] BitAData[1500] SIntData[6000] DIntData[1500] RealData[1500]
3999 BoolData[63999] SIntData[9998]