Command function codes – ProSoft Technology MVI71-DFNT User Manual

Page 114

Reference

MVI71-DFNT ♦ PLC 5

User Manual

EtherNet/IP Client/Server Communication Module

Page 114 of 175

ProSoft Technology, Inc.

February 3, 2011

5.10 Command Function Codes

In the following discussion, the Column values are described for the serial DFCM

Command list (See Node Address parameter #6). In the DFNT module, the Node

address has been replaced with two parameters; the IP Address and the Slot

Number, causing the Function Code and Function Parameters to occupy

positions 8 to 12 instead of 7 to 11. Aside from this difference, all other

information is correct.

DFNT Configuration Form

Module Information Data

Device Information Data

Enable

Code

Internal

Address

Poll

Interval

Time

Count Swap

Code

Address

Slot

Number

Function

Code

Function Parameters

DFNT Command Structure

Module Information Data

Device Information Data

Column # 1

11 12

Function

Code

Enable

Code

Internal

Address

Poll

Interval

Time

Count Swap

Code

Address

Slot

Number

Function

Code

Function Parameters